Details

---

BUY A1360,C3423 https://www.utsource.net/itm/p/11708701.html

Parameter	A1360	C3423
Type	Hall Effect Sensor	Capacitor
Operating Voltage	3.8V to 28V	-
Output Type	Digital (Open Collector)	-
Supply Current	5.5mA (Max)	-
Operating Temperature Range	-40掳C to 150掳C	-55掳C to +125掳C
Package	SOT-23-3	Radial
Capacitance	-	10渭F, 22渭F, 33渭F, 47渭F, 100渭F
Tolerance	-	卤10%, 卤20%
Voltage Rating	-	50V, 100V, 160V, 250V
Ripple Current	-	150mA, 200mA, 300mA

Instructions for A1360:

1. Power Supply: Connect the VCC pin to a power supply within the operating voltage range (3.8V to 28V).
2. Ground Connection: Ensure the GND pin is connected to the ground.
3. Output Connection: The OUT pin is an open collector output. Connect it to a pull-up resistor and the desired load.
4. Magnetic Field Sensing: Place the sensor in the magnetic field to be detected. The output will switch based on the magnetic field strength.
5. Operating Temperature: Ensure the sensor operates within the temperature range of -40掳C to 150掳C.

Instructions for C3423:

1. Capacitance Selection: Choose the appropriate capacitance value (10渭F, 22渭F, 33渭F, 47渭F, 100渭F) based on your application requirements.
2. Voltage Rating: Ensure the selected capacitor has a voltage rating suitable for your circuit (50V, 100V, 160V, 250V).
3. Polarity: For electrolytic capacitors, ensure the positive lead is connected to the higher potential and the negative lead to the lower potential.
4. Ripple Current: Consider the ripple current rating (150mA, 200mA, 300mA) to avoid overheating and damage.
5. Operating Temperature: Ensure the capacitor operates within the temperature range of -55掳C to +125掳C.
6. Mounting: Mount the capacitor securely to prevent mechanical stress and ensure good electrical connections.

(For reference only)