Details

---

BUY ADG406BN https://www.utsource.net/itm/p/11712836.html
IC MULTIPLEXER 16X1 28DIP

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Quiescent Current	IQ	-	1.2	-	mA	Supply current at VDD = 5V, all channels off
Channel-to-Channel Isolation	-	-	80	-	dB	Isolation between channels at 1 MHz
On-State Resistance	RON	20	30	40	Ω	Maximum on-state resistance per channel at VDD = 5V, TA = 25°C
Leakage Current	ILEAK	-	±1	-	μA	Maximum leakage current per channel at VDD = 5V, TA = 25°C
Input Signal Range	VIN	-0.3	-	VDD + 0.3	V	Input signal range for analog signals
Switching Time	tSW	1	-	10	μs	Time to switch from off to on state
Operating Temperature	TA	-40	-	85	°C	Ambient operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the specified range of 2.7V to 5.5V.
   • Connect the ground (GND) pin to the system ground.

2. Channel Control:

   • The ADG406BN is controlled by digital inputs (S0, S1, S2) to select one of the six channels.
   • Set the digital inputs to the appropriate binary values to activate the desired channel.

3. Signal Handling:

   • Analog signals should be within the input signal range (-0.3V to V_DD + 0.3V).
   • Ensure that the signal does not exceed these limits to avoid damage to the device.

4. Thermal Management:

   • Operate the device within the ambient temperature range of -40°C to 85°C.
   • For extended storage, ensure temperatures do not fall below -65°C or rise above 150°C.

5. Electrical Characteristics:

   • Monitor the quiescent current (I_Q) to ensure it remains within the typical value of 1.2mA.
   • Check the on-state resistance (R_ON) to ensure it is within the specified range for optimal performance.

6. Handling and Installation:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure reliable connections and prevent thermal stress.

7. Testing:

   • After installation, test the device by applying known signals to the selected channels and verifying the output.
   • Measure the leakage current (I_LEAK) to ensure it is within the specified limits.

By following these instructions, you can ensure the ADG406BN operates reliably and efficiently in your application.

(For reference only)