Details

---

BUY AMP02FS https://www.utsource.net/itm/p/11712974.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	V_IN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	V_OUT	-	3.3	-	V	Fixed output voltage
Output Current	I_OUT	-	200	-	mA	Continuous output current
Quiescent Current	I_Q	-	1.5	-	μA	Current consumption in active mode
Shutdown Current	I_SD	-	0.1	-	μA	Current consumption in shutdown mode
Dropout Voltage	V_DO	-	200	-	mV	Voltage difference between V_IN and V_OUT
Load Regulation	-	-	0.5	-	%	Change in output voltage with load
Line Regulation	-	-	0.1	-	%/V	Change in output voltage with input voltage
Thermal Shutdown	T_SHD	-	160	-	°C	Temperature at which the device shuts down
Operating Temperature	T_OP	-40	-	85	°C	Ambient temperature range for operation
Storage Temperature	T_STG	-65	-	150	°C	Temperature range for storage

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the positive terminal of the power supply.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Connection:

   • Connect the output voltage (V_OUT) to the load or circuit requiring a stable 3.3V supply.
   • The maximum continuous output current is 200mA.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the system.

4. Shutdown Pin:

   • To put the device into shutdown mode, connect the shutdown (SD) pin to ground (GND).
   • To activate the device, leave the SD pin open or connect it to V_IN.

5. Capacitors:

   • Place a 1μF ceramic capacitor close to the input (V_IN) and output (V_OUT) pins to ensure stability.
   • Additional capacitors may be required depending on the specific application and load characteristics.

6. Thermal Management:

   • Ensure adequate heat dissipation if operating at high currents or in high ambient temperatures.
   • The device will automatically shut down if the junction temperature exceeds 160°C.

7. Storage and Handling:

   • Store the device in a dry environment within the temperature range of -65°C to 150°C.
   • Handle the device with care to avoid damage from electrostatic discharge (ESD).

8. Testing:

   • Before finalizing the design, test the device under various operating conditions to ensure it meets the required performance specifications.

9. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)