Details

---

BUY TJA1040T/CM,118 https://www.utsource.net/itm/p/11719787.html
IC TRANSCEIVER HALF 1/1 8SO

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	3.0	-	5.5	V	-
Quiescent Current	ICC	-	1.2	-	mA	VCC = 5V, no load
Output Current	IO	-	-	40	mA	Continuous, VCC = 5V
Differential Input Voltage Range	VID	-2	-	12	V	-
Common-Mode Input Voltage Range	VICM	-2	-	14	V	-
Input Offset Voltage	VOS	-0.5	0	0.5	mV	VCC = 5V
Slew Rate	SR	-	1.0	-	V/μs	VCC = 5V
Operating Temperature Range	TOP	-40	-	125	°C	-
Storage Temperature Range	TSTG	-65	-	150	°C	-

Instructions for TJA1040T/CM,118

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 3.0V to 5.5V.
   • Use a stable power supply to avoid fluctuations that can affect performance.

2. Quiescent Current:

   • The quiescent current is typically 1.2mA at 5V. Ensure your power supply can handle this current without significant voltage drop.

3. Output Current:

   • The maximum continuous output current is 40mA. Do not exceed this limit to prevent damage to the device.

4. Differential and Common-Mode Input Voltage:

   • The differential input voltage range is -2V to 12V, and the common-mode input voltage range is -2V to 14V. Ensure input signals stay within these ranges to avoid distortion or damage.

5. Input Offset Voltage:

   • The input offset voltage is ±0.5mV at 5V supply. This should be considered when designing circuits that require high precision.

6. Slew Rate:

   • The slew rate is 1.0V/μs. This is important for applications involving fast-changing signals to ensure accurate signal reproduction.

7. Operating and Storage Temperature:

   • The operating temperature range is -40°C to 125°C, and the storage temperature range is -65°C to 150°C. Ensure the device is used and stored within these limits to maintain reliability.

8. Handling and Installation:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow proper soldering techniques to ensure reliable connections and prevent thermal damage during installation.

9. Testing and Troubleshooting:

   • Regularly test the device to ensure it is functioning within specified parameters.
   • If issues arise, check for power supply stability, correct input signal levels, and proper connections.

10. Compliance and Standards:

    • Ensure the device complies with relevant industry standards and regulations for your specific application.

(For reference only)