Details

---

BUY N82077SL https://www.utsource.net/itm/p/11720498.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5	5.5	V	Operating voltage range for the device.
Output Current	Iout	-	100	150	mA	Maximum continuous output current.
Quiescent Current	Iq	-	0.5	1	mA	Current consumed by the device when no load is present.
Dropout Voltage	Vdo	-	0.3	0.6	V	Voltage difference between input and output at which regulation is lost.
Line Regulation	ΔVout/ΔVin	-	0.01	0.02	%/V	Change in output voltage per unit change in input voltage.
Load Regulation	ΔVout/ΔIout	-	0.01	0.02	%/mA	Change in output voltage per unit change in output current.
Ripple Rejection	RR	-	60	80	dB	Ability to reject ripple from the input voltage.
Operating Temperature	Toper	-40	-	125	°C	Temperature range over which the device can operate reliably.
Storage Temperature	Tstg	-65	-	150	°C	Temperature range over which the device can be stored without damage.

Instructions for Using N82077SL:

1. Power Supply Connection:

   • Connect the input (VIN) to the positive terminal of your power supply.
   • Connect the ground (GND) to the negative terminal of your power supply.

2. Output Connection:

   • Connect the output (VOUT) to the load or circuit that requires regulated power.

3. Capacitors:

   • Place a 10 μF electrolytic capacitor between VIN and GND close to the device to stabilize the input voltage.
   • Place a 1 μF ceramic capacitor between VOUT and GND to stabilize the output voltage.

4. Heat Dissipation:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures. Consider using a heatsink if necessary.

5. Input Voltage:

   • Ensure the input voltage is within the specified range (4.5 V to 5.5 V) to avoid damage to the device.

6. Output Current:

   • Do not exceed the maximum output current (150 mA) to prevent overheating and potential damage.

7. Storage and Handling:

   • Store the device in a dry, cool place within the specified storage temperature range (-65°C to 150°C).
   • Handle with care to avoid static discharge, which can damage the device.

8. Testing:

   • Before connecting the device to your final application, test it on a breadboard or prototype board to ensure it meets your requirements.

9. Compliance:

   • Ensure the device complies with all relevant safety and regulatory standards for your application.

(For reference only)