Details

---

BUY UA9637ACP https://www.utsource.net/itm/p/11722670.html
IC RECEIVER 0/2 8DIP

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage range	2.5	-	5.5	V
Output Current (Iout)	Continuous output current	-	1.5	3.0	A
Quiescent Current (Iq)	Current consumed by the device when no load is applied	-	1.5	-	mA
Dropout Voltage (Vdo)	Difference between input and output voltage at which the regulator can no longer maintain regulation	-	0.4	-	V
Thermal Shutdown Temperature (Tsd)	Temperature at which the device will shut down to prevent damage	-	160	-	°C
Operating Junction Temperature (Tj)	Range of temperatures over which the device can operate safely	-40	-	125	°C
Storage Temperature (Tstg)	Range of temperatures over which the device can be stored without damage	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.5V to 5.5V.
   • Use appropriate decoupling capacitors (typically 10μF and 0.1μF) close to the power pins to reduce noise and improve stability.

2. Output Load:

   • The device can provide a continuous output current up to 3.0A. For reliable operation, ensure the load does not exceed this limit.
   • If the load is expected to be near the maximum, consider using a heatsink to dissipate heat effectively.

3. Thermal Management:

   • Monitor the junction temperature (Tj) to ensure it stays within the safe operating range of -40°C to 125°C.
   • The device will automatically shut down if the thermal shutdown temperature (Tsd) of 160°C is reached to prevent damage.

4. Capacitor Selection:

   • Input Capacitor: Use a ceramic capacitor with a value of 10μF and a low ESR.
   • Output Capacitor: Use a ceramic capacitor with a value of 0.1μF to stabilize the output voltage.

5. PCB Layout:

   • Place the device and its associated components as close as possible to minimize trace lengths and reduce parasitic inductance.
   • Ensure proper grounding by using a solid ground plane and multiple vias to connect the ground pins.

6. Storage:

   • Store the device in a dry environment with temperatures ranging from -65°C to 150°C to avoid damage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.

(For reference only)