Details

---

BUY G7PH35UD1-E IRG7PH35UD1-E TO-247 https://www.utsource.net/itm/p/11723367.html

Parameter	Description	Value	Unit
Part Number	Full Part Number	IRG7PH35UD1-E	-
Package Type	Encapsulation	TO-247	-
Absolute Maximum Ratings	-	-	-
VDSS	Drain-to-Source Voltage	700	V
VGSS	Gate-to-Source Voltage	±20	V
ID (TC = 25°C)	Continuous Drain Current	35	A
ID (TC = 100°C)	Continuous Drain Current	26	A
PTOT (TC = 25°C)	Total Power Dissipation	238	W
PTOT (TC = 100°C)	Total Power Dissipation	175	W
TJ	Junction Temperature	-55 to +175	°C
TSTG	Storage Temperature Range	-55 to +175	°C
Electrical Characteristics	-	-	-
RDS(on) (VGS = 10V, ID = 35A)	On-State Resistance	1.6	Ω
QG (VGS = 10V, ID = 35A)	Total Gate Charge	75	nC
td(on) (VGS = 10V, ID = 35A)	Turn-On Delay Time	150	ns
td(off) (VGS = 10V, ID = 35A)	Turn-Off Delay Time	100	ns
tr (VGS = 10V, ID = 35A)	Rise Time	100	ns
tf (VGS = 10V, ID = 35A)	Fall Time	75	ns
Physical Dimensions	-	-	-
Lead Spacing	Distance Between Leads	5.08	mm
Lead Length	Length of Leads	5.08	mm
Body Height	Height of the Package	4.5	mm
Body Width	Width of the Package	15.4	mm
Body Length	Length of the Package	21.8	mm

Instructions:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical damage.
   • Use appropriate tools and techniques for soldering and mounting to prevent thermal shock.

2. Thermal Management:

   • Ensure adequate heat sinking to keep the junction temperature within the specified range.
   • Use thermal paste or thermal interface materials between the device and the heatsink for better thermal conductivity.

3. Electrical Connections:

   • Connect the drain, source, and gate terminals correctly to avoid damage.
   • Use short leads and wide traces to minimize inductance and resistance.

4. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Handle the device with ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Refer to the datasheet for detailed testing procedures and recommended test circuits.

(For reference only)