Details

---

BUY BCR8PM-12LG,BCR8PM https://www.utsource.net/itm/p/11724640.html

Parameter	BCR8PM-12LG	BCR8PM
Type	Photocoupler	Photocoupler
Package	12-Lead SOIC	8-Lead SOIC
Input Device	GaAs Photodiode	GaAs Photodiode
Output Device	Silicon NPN Transistor	Silicon NPN Transistor
Isolation Voltage (VISO)	5000 Vrms (1 min)	5000 Vrms (1 min)
Collector-Emitter Voltage (VCE) Max	70 V	70 V
Collector Current (IC) Max	50 mA	50 mA
Forward Current (IF) Max	30 mA	30 mA
Storage Temperature (Tstg)	-40掳C to +110掳C	-40掳C to +110掳C
Operating Temperature (Topr)	-40掳C to +105掳C	-40掳C to +105掳C
Current Transfer Ratio (CTR)	50% to 300% (Typical)	50% to 300% (Typical)
Propagation Delay Time (tpd)	1 渭s (Max)	1 渭s (Max)
Rise Time (tr)	0.5 渭s (Max)	0.5 渭s (Max)
Fall Time (tf)	0.5 渭s (Max)	0.5 渭s (Max)
Mounting Type	Surface Mount	Surface Mount

Instructions:

1. Handling Precautions:

   • Avoid applying excessive force or torque during soldering.
   • Use appropriate temperature and time settings for soldering to prevent damage to the device.

2. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive substances.
   • Follow the recommended storage temperature range to ensure reliability.

3. Electrical Connections:

   • Ensure proper polarity when connecting the input and output leads.
   • Use appropriate current-limiting resistors to avoid exceeding the maximum forward current (IF) and collector current (IC).

4. Mounting:

   • Ensure that the board is clean and free of contaminants before mounting.
   • Follow the recommended PCB layout guidelines to minimize noise and interference.

5. Testing:

   • Use a suitable test setup to verify the functionality of the photocoupler.
   • Measure the current transfer ratio (CTR) and propagation delay time (tpd) to ensure the device meets the specified parameters.

6. Safety:

   • Handle with care to avoid static discharge, which can damage the internal components.
   • Ensure that the isolation voltage (VISO) is not exceeded to maintain safety and performance.

7. Compliance:

   • Ensure that the device complies with relevant safety and regulatory standards for your application.

(For reference only)