Details

---

BUY BC547C C547C PH TO-92 https://www.utsource.net/itm/p/11724654.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	50	-	V
Collector-Base Voltage	VCBO	-	60	-	V
Emitter-Base Voltage	VEBO	-	5	-	V
Collector Current	IC	-	100	-	mA
Base Current	IB	-	5	-	mA
DC Current Gain	hFE	110	800	-	-
Transition Frequency	fT	-	300	-	MHz
Power Dissipation	PD	-	625	-	mW
Operating Temperature	Tj	-55	-	150	掳C

Instructions for Using BC547C (TO-92 Package):

1. Pin Configuration:

   • E (Emitter): Pin 1 (left pin when looking at the flat side with the leads pointing downwards)
   • B (Base): Pin 2 (middle pin)
   • C (Collector): Pin 3 (right pin)

2. Mounting:

   • Ensure the transistor is mounted on a suitable PCB or breadboard.
   • Avoid excessive heat during soldering, as it can damage the transistor. Use a heat sink if necessary.

3. Biasing:

   • For typical NPN applications, ensure the base is biased correctly to control the collector current.
   • Use appropriate resistors to limit the base current and prevent damage to the transistor.

4. Power Supply:

   • Ensure the power supply voltage does not exceed the maximum ratings specified in the table.
   • Use decoupling capacitors to stabilize the power supply and reduce noise.

5. Heat Dissipation:

   • If the transistor will be operating near its maximum power dissipation, consider using a heatsink to improve thermal management.

6. Storage:

   • Store the transistor in a dry, cool place to avoid moisture damage.
   • Handle the transistor by the body and not the leads to avoid static discharge.

7. Testing:

   • Before integrating the transistor into a circuit, test it using a multimeter to ensure it is functioning correctly.
   • Check for continuity between the pins and verify the hFE value if possible.

8. Safety:

   • Always follow proper electrical safety guidelines when working with circuits.
   • Use appropriate protective equipment such as gloves and safety glasses when handling components and soldering.

(For reference only)