Details
BUY 2SA2151A,2SC6011A https://www.utsource.net/itm/p/11725076.html
| Parameter | 2SA2151A (PNP) | 2SC6011A (NPN) |
|---|---|---|
| Type | PNP | NPN |
| Collector-Emitter Voltage (Vceo) | 60V | 60V |
| Emitter-Base Voltage (Vebo) | 6V | 6V |
| Collector-Base Voltage (Vcbo) | 60V | 60V |
| Collector Current (Ic) | 1.5A | 1.5A |
| Power Dissipation (Ptot) | 30W | 30W |
| Maximum Operating Temperature (Tj) | -55掳C to +150掳C | -55掳C to +150掳C |
| Storage Temperature (Tstg) | -55掳C to +150掳C | -55掳C to +150掳C |
| Transition Frequency (ft) | 40 MHz | 40 MHz |
| Current Gain (hFE) | 20 to 200 | 20 to 200 |
| Saturation Voltage (Vce(sat)) | 0.8V (Ic = 1.5A) | 0.8V (Ic = 1.5A) |
| Storage Diode Reverse Current (Icr2) | 10 渭A (Vce = 60V) | 10 渭A (Vce = 60V) |
| Package | TO-39 | TO-39 |
Instructions for Use:
General Handling:
- Static Sensitivity: Both transistors are sensitive to static electricity. Handle them with care and use proper ESD protection.
- Mounting: Ensure that the mounting surface is clean and flat. Use a thermal compound to improve heat dissipation if necessary.
- Soldering: Solder the leads quickly to avoid overheating the junction. Use a temperature-controlled soldering iron and do not exceed 300掳C for more than 3 seconds per connection.
Circuit Design:
- Biasing: Proper biasing is crucial for stable operation. Use appropriate resistors to set the base current and ensure the transistor operates within its safe operating area (SOA).
- Heat Sinking: For high-power applications, use a suitable heat sink to keep the junction temperature within the specified limits.
- Protection: Consider adding reverse-bias protection diodes and transient voltage suppressors to protect against voltage spikes and surges.
Storage:
- Temperature: Store the transistors in a dry, cool place within the specified storage temperature range.
- Packaging: Keep the transistors in their original packaging or in anti-static bags to prevent damage from static discharge.
Testing:
- Initial Testing: Before installing the transistors in a circuit, test them using a multimeter or a transistor tester to ensure they are functioning correctly.
- In-Circuit Testing: Once installed, monitor the temperature and performance of the transistors to ensure they are operating within their specifications.
View more about 2SA2151A,2SC6011A on main site