Details

---

BUY A2151A,C6011A https://www.utsource.net/itm/p/11725077.html

Parameter	A2151A	C6011A
Type	Hall Effect Sensor	Hall Effect Sensor
Supply Voltage	4.5V to 24V	4.5V to 24V
Operating Current	10mA (max)	10mA (max)
Output Type	Open Collector	Open Collector
Output Voltage	0V (Low), Supply Voltage (High)	0V (Low), Supply Voltage (High)
Magnetic Sensitivity	-50G to -100G	-50G to -100G
Response Time	<1渭s	<1渭s
Operating Temperature	-40掳C to 150掳C	-40掳C to 150掳C
Storage Temperature	-55掳C to 150掳C	-55掳C to 150掳C
Package	TO-92	TO-92
Polarity	Bipolar	Bipolar

Instructions for Use

A2151A

1. Power Supply: Connect the Vcc pin to a power supply within the range of 4.5V to 24V.
2. Ground Connection: Connect the GND pin to the ground of your circuit.
3. Output Connection: Connect the OUT pin to the input of your microcontroller or other device. The output is open collector, so you may need a pull-up resistor to the supply voltage.
4. Magnetic Field: Place a magnetic field near the sensor to trigger the output. The sensor will switch when the magnetic field strength is within the specified range (-50G to -100G).
5. Temperature Considerations: Ensure that the operating temperature is within the specified range (-40掳C to 150掳C).

C6011A

1. Power Supply: Connect the Vcc pin to a power supply within the range of 4.5V to 24V.
2. Ground Connection: Connect the GND pin to the ground of your circuit.
3. Output Connection: Connect the OUT pin to the input of your microcontroller or other device. The output is open collector, so you may need a pull-up resistor to the supply voltage.
4. Magnetic Field: Place a magnetic field near the sensor to trigger the output. The sensor will switch when the magnetic field strength is within the specified range (-50G to -100G).
5. Temperature Considerations: Ensure that the operating temperature is within the specified range (-40掳C to 150掳C).

(For reference only)