Details

---

BUY 2SK1522 ORIGINAL GOODS IN STOCK https://www.utsource.net/itm/p/11728556.html

Parameter	Value
Type	MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor)
Part Number	2SK1522
Brand	Original Goods in Stock
Package Type	TO-247
Polarity	N-Channel
VDS (Drain-Source Voltage)	500 V
VGS (Gate-Source Voltage)	卤20 V
ID (Continuous Drain Current)	15 A (at 25掳C)
RDS(on) (On-State Resistance)	0.25 惟 (max) at VGS = 10 V
Power Dissipation (PD)	200 W (at 25掳C)
Operating Temperature Range	-55掳C to +150掳C
Storage Temperature Range	-65掳C to +150掳C
Junction Temperature (TJ)	-55掳C to +150掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the 2SK1522 with care to avoid static damage.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure that the heatsink is properly attached to the TO-247 package to dissipate heat effectively.
   • Use thermal paste between the heatsink and the MOSFET to improve thermal conductivity.

3. Biasing:

   • Apply the gate voltage (VGS) within the specified range (卤20 V) to ensure proper operation.
   • Avoid exceeding the maximum drain-source voltage (VDS) of 500 V to prevent breakdown.

4. Current Limiting:

   • Ensure that the continuous drain current (ID) does not exceed 15 A at 25掳C to prevent overheating and damage.
   • If operating at higher temperatures, derate the current accordingly.

5. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it remains within the operating range (-55掳C to +150掳C).
   • Use forced air cooling or a larger heatsink if necessary to maintain optimal operating temperatures.

6. Testing:

   • Before integrating the 2SK1522 into your circuit, test its parameters using a multimeter or other appropriate testing equipment to ensure it meets the specifications.

7. Storage:

   • Store the 2SK1522 in a dry, cool place within the storage temperature range (-65掳C to +150掳C).
   • Keep the device in its original packaging until ready for use to protect against moisture and static damage.

8. Soldering:

   • Use a soldering iron with a temperature-controlled tip to avoid damaging the MOSFET during soldering.
   • Follow recommended soldering profiles to ensure a reliable connection without overheating the device.

(For reference only)