Details

---

BUY TK14G65W https://www.utsource.net/itm/p/11734302.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	3.6	V	Operating voltage range
Standby Current	ISB	-	1	5	渭A	Current consumption in standby mode
Active Current	IOP	-	200	300	渭A	Current consumption in active mode
Output Current	IO	0	10	20	mA	Maximum output current per channel
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range
Input Voltage Range	VIN	0	-	VDD	V	Valid input voltage range
Output Voltage Range	VOUT	0	-	VDD	V	Valid output voltage range
Rise Time	tr	-	10	20	ns	Output rise time
Fall Time	tf	-	10	20	ns	Output fall time
Propagation Delay	tpd	-	15	25	ns	Propagation delay time

Instructions for Using TK14G65W

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 3.6V.
   • Connect the VDD pin to the positive terminal of your power supply and GND to the ground.

2. Standby Mode:

   • To enter standby mode, set the enable pin (EN) to a low logic level (0V).
   • The device will consume minimal current (ISB) in this mode.

3. Active Mode:

   • To activate the device, set the enable pin (EN) to a high logic level (VDD).
   • The device will consume the typical active current (IOP).

4. Input and Output:

   • Apply input signals within the valid input voltage range (0V to VDD).
   • The output signals will be within the valid output voltage range (0V to VDD).

5. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40掳C to 85掳C).
   • Store the device within the storage temperature range (-65掳C to 150掳C).

6. Timing Parameters:

   • Ensure that the rise time (tr) and fall time (tf) of the output signals are within the specified ranges.
   • Account for the propagation delay (tpd) when designing your circuit timing.

7. Handling and Storage:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Store the device in a dry and cool environment to prevent moisture damage.

8. Mounting and Soldering:

   • Follow the recommended soldering profile to ensure reliable connections.
   • Avoid overheating the device during soldering, as it can damage the internal components.

9. Testing:

   • After assembly, test the device under various conditions to ensure it meets the specified performance parameters.
   • Use appropriate test equipment to measure the current, voltage, and timing characteristics.

By following these instructions, you can ensure optimal performance and reliability of the TK14G65W in your application.

(For reference only)