Details

---

BUY HEF4794BT https://www.utsource.net/itm/p/11734807.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	3.0	-	18.0	V	Operating supply voltage range
Input High Voltage	VIH	2.0	-	VCC - 0.5	V	Minimum input high voltage
Input Low Voltage	VIL	0.0	-	0.8	V	Maximum input low voltage
Output High Voltage (VCC = 5V)	VOH	2.4	-	5.0	V	Minimum output high voltage
Output Low Voltage (VCC = 5V)	VOL	0.0	-	0.4	V	Maximum output low voltage
Output Current (Source)	IOH	-	-	200	μA	Maximum output current when sourcing
Output Current (Sink)	IOL	-	-	16	mA	Maximum output current when sinking
Propagation Delay Time	tp	-	50	150	ns	Typical propagation delay time
Power Dissipation	PTOT	-	-	700	mW	Maximum total power dissipation
Operating Temperature Range	TA	-40	-	85	°C	Ambient operating temperature range
Storage Temperature Range	TSTG	-65	-	150	°C	Temperature range for storage

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range (3.0V to 18.0V). The device will not operate correctly outside this range.
2. Input Voltage Levels: Inputs should be driven with voltages that meet the V_IH and V_IL specifications to ensure proper logic levels.
3. Output Voltage Levels: When V_CC is 5V, the output high voltage (V_OH) should be at least 2.4V, and the output low voltage (V_OL) should be no more than 0.4V.
4. Output Current: The device can source up to 200μA and sink up to 16mA. Ensure that the load does not exceed these limits to avoid damage.
5. Propagation Delay: The typical propagation delay time is 50ns, but it can vary between 50ns and 150ns. This should be considered in timing-sensitive applications.
6. Power Dissipation: The maximum total power dissipation is 700mW. Ensure adequate heat dissipation if the device is operating near this limit.
7. Temperature Ranges: The device is designed to operate in ambient temperatures from -40°C to 85°C and can be stored between -65°C and 150°C.
8. Handling: Static electricity can damage the device. Handle with care and use appropriate ESD protection measures.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• For specific applications, consult the application notes or contact the manufacturer for further guidance.

(For reference only)