Details

---

BUY IRAMX16UP60A https://www.utsource.net/itm/p/11736066.html

Below is the parameter table and instructions for the IRAMX16UP60A, a 60V N-Channel Power MOSFET from Infineon Technologies.

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Test Conditions
Drain-Source Voltage	( V_ )	-	-	60	V
Gate-Source Voltage	( V_ )	-12	-	12	V
Continuous Drain Current	( I_ )	-	-	16	A	( T_A = 25^circ C )
Pulsed Drain Current	( I_{D(pulse)} )	-	-	32	A	( t_ = 10 mu s, T_A = 25^circ C )
Gate Charge	( Q_g )	-	49	-	nC	( V_ = 10V, I_D = 16A )
Input Capacitance	( C_ )	-	280	-	pF	( V_ = 25V, f = 1 MHz )
Output Capacitance	( C_ )	-	70	-	pF	( V_ = 25V, f = 1 MHz )
Threshold Voltage	( V_{GS(th)} )	1.0	1.5	2.5	V	( I_D = 250 mu A )
On-State Resistance	( R_{DS(on)} )	-	45	-	mΩ	( V_ = 10V, I_D = 16A )
Total Power Dissipation	( P_T )	-	-	125	W	( T_C = 25^circ C )
Junction Temperature	( T_J )	-	-	175	°C
Storage Temperature Range	( T_ )	-55	-	150	°C

Instructions

1. Handling and Storage:

   • Handle the device with care to avoid damage.
   • Store in a dry environment to prevent moisture damage.
   • Follow ESD (Electrostatic Discharge) precautions to avoid damaging the device.

2. Mounting:

   • Ensure proper heat sinking to manage thermal dissipation.
   • Use recommended mounting torque for the screws to avoid mechanical stress.
   • Ensure good electrical and thermal contact between the device and the heat sink.

3. Biasing:

   • Apply the gate-source voltage (( V_ )) within the specified limits to avoid damage.
   • Ensure the gate drive circuitry can provide the necessary current to charge and discharge the gate capacitance quickly.

4. Operation:

   • Operate the device within the specified drain-source voltage (( V_ )) and continuous drain current (( I_D )) limits.
   • Monitor the junction temperature (( T_J )) to ensure it does not exceed the maximum rating.
   • For pulsed applications, ensure the pulse width and frequency do not exceed the specified limits.

5. Testing:

   • Use the test conditions provided in the parameter table for accurate measurements.
   • Ensure all test equipment is calibrated and functioning correctly.

6. Safety:

   • Follow all safety guidelines and regulations when handling and testing high-voltage and high-current circuits.
   • Use appropriate personal protective equipment (PPE) as needed.

By following these parameters and instructions, you can ensure optimal performance and reliability of the IRAMX16UP60A.

(For reference only)