Details

---

BUY H40T60B https://www.utsource.net/itm/p/11736132.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.0	-	5.5	V	Operating supply voltage range
Input Voltage	VIN	-0.3	-	6.0	V	Maximum input voltage
Output Current	IOUT	-	10	20	mA	Continuous output current
Quiescent Current	IQ	-	1.5	3.0	μA	Supply current at no load
Operating Temp.	Toper	-40	-	85	°C	Operating temperature range
Storage Temp.	Tstg	-65	-	150	°C	Storage temperature range

Instructions for H40T60B:

1. Power Supply Connection:

   • Connect the VDD pin to a power supply within the specified voltage range (2.0V to 5.5V).
   • Ensure the ground (GND) is properly connected to avoid floating.

2. Input Signal Handling:

   • Apply input signals to the appropriate input pins, ensuring the voltage does not exceed 6.0V to prevent damage.

3. Output Load Management:

   • The device can drive loads requiring up to 20mA continuously. For higher currents, consider external drivers or buffers.

4. Thermal Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for reliable performance.
   • If storing the device, ensure temperatures do not fall below -65°C or rise above 150°C.

5. Handling and Installation:

   • Handle with care to avoid electrostatic discharge (ESD) damage.
   • Follow proper soldering techniques to ensure good electrical connections without overheating the component.

6. Testing and Verification:

   • After installation, verify all connections and test the functionality under typical operating conditions to ensure correct operation.

(For reference only)