Details

---

BUY TLP185(GB-TPL,E) https://www.utsource.net/itm/p/11737049.html
You deserve it

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.2	1.6	V	IF = 20 mA
Reverse Voltage	VR	-	-	5	V	-
Continuous Forward Current	IF	-	-	50	mA	Ta = 25°C
Peak Forward Current	IF(surge)	-	-	100	mA	t = 1 s, Ta = 25°C
Output Collector-Emitter Voltage	VCEO	-	-	30	V	IC = 50 mA, VR = 5 V
Output Collector Current	IC	-	-	50	mA	Ta = 25°C
CTR (Current Transfer Ratio)	CTR	200	400	800	%	IF = 5 mA, IC = 5 mA
Rise Time	tr	-	1.5	2.5	μs	RL = 1 kΩ, CL = 100 pF
Fall Time	tf	-	1.5	2.5	μs	RL = 1 kΩ, CL = 100 pF
Storage Temperature	TSTG	-40	-	110	°C	-
Operating Temperature	TOP	-40	-	105	°C	-

Instructions for Use:

1. Mounting:

   • Ensure that the device is mounted on a PCB with appropriate soldering techniques.
   • Avoid excessive heat during soldering to prevent damage to the device.

2. Electrical Connections:

   • Connect the anode and cathode leads correctly to avoid reverse bias conditions.
   • Ensure that the output collector and emitter leads are connected to the appropriate circuit nodes.

3. Power Supply:

   • Do not exceed the maximum ratings for forward voltage, reverse voltage, and current.
   • Use appropriate current-limiting resistors to ensure the device operates within its safe operating area.

4. Thermal Management:

   • Ensure adequate cooling if the device will be operated at high currents or in high ambient temperatures.
   • Refer to the thermal resistance data provided by the manufacturer for optimal heat dissipation.

5. Storage and Handling:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle the device with care to avoid mechanical stress or damage to the leads.

6. Testing:

   • Use a suitable test setup to verify the device parameters such as CTR, rise time, and fall time.
   • Ensure that the test conditions match the specified conditions in the datasheet.

7. Safety:

   • Follow all safety guidelines when handling and testing the device.
   • Use appropriate protective equipment to prevent electrical shock or injury.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)