Details

---

BUY ISO3086TDWR https://www.utsource.net/itm/p/11741569.html

Parameter	Description	Value
Device	Isolated Digital Input with Logic-Level Translation and Fault Detection	ISO3086TDWR
Supply Voltage (VDD1/VDD2)	Operating supply voltage range for primary and secondary side	2.7 V to 5.5 V
Isolation Voltage	Working isolation voltage	5000 VRMS
Input Signal Type	Logic input signal type	CMOS/TTL
Output Signal Type	Logic output signal type	CMOS
Propagation Delay Time (tPHL/tPLH)	Maximum propagation delay time	10 ns (max)
Operating Temperature Range	Ambient operating temperature range	-40掳C to +125掳C
Fault Detection	Detects open circuit, short circuit, and overvoltage conditions on the input	Yes
Package Type	Package type	SOIC-16
Pin Count	Number of pins	16

Instructions:

1. Power Supply Connection: Connect VDD1 and VDD2 to appropriate power supplies within the specified voltage range. Ensure GND1 and GND2 are properly grounded.
2. Signal Input: Apply logic signals to the input pins according to the CMOS/TTL specifications. Ensure proper termination and noise suppression.
3. Signal Output: The output will follow the input logic state after a propagation delay. Monitor for any fault conditions indicated by the device.
4. Fault Monitoring: Check for fault detection signals which can be used to diagnose issues such as open or short circuits in the input lines.
5. Installation and Handling: Handle the device carefully to avoid damage to the isolation barrier. Follow standard ESD protection guidelines during installation.
6. Environmental Considerations: Operate within the specified temperature range to ensure reliable performance. Avoid exposing the device to excessive moisture or corrosive environments.

(For reference only)