Details

---

BUY TPC8114 https://www.utsource.net/itm/p/11742733.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating voltage range
Output Current	IOUT	-	100	200	mA	Maximum output current
Quiescent Current	IQ	-	10	20	μA	Typical quiescent current
Dropout Voltage	VDROPOUT	-	200	300	mV	Dropout voltage at IOUT = 100 mA
Load Regulation	-	-	0.2	0.5	%	Change in output voltage with load
Line Regulation	-	-	0.1	0.3	%	Change in output voltage with input voltage
Ripple Rejection	-	60	70	80	dB	Ability to reject ripple on the input voltage
Operating Temperature	Toper	-40	-	125	°C	Temperature range for operation
Storage Temperature	Tstg	-65	-	150	°C	Temperature range for storage

Instructions for Using TPC8114

1. Supply Voltage:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Use appropriate decoupling capacitors (typically 10μF and 0.1μF) close to the VDD pin to stabilize the supply.

2. Output Current:

   • The maximum continuous output current is 200mA. Ensure that the load does not exceed this limit to avoid overheating or damage.
   • For higher current applications, consider using external transistors or other power management solutions.

3. Quiescent Current:

   • The typical quiescent current is 10μA, which is relatively low. This makes the TPC8114 suitable for battery-powered applications.

4. Dropout Voltage:

   • The dropout voltage is typically 200mV at 100mA output current. Ensure that the input voltage is at least 200mV higher than the desired output voltage to maintain regulation.

5. Load and Line Regulation:

   • The load regulation is typically 0.2%, meaning the output voltage will change by 0.2% for a full load change.
   • The line regulation is typically 0.1%, indicating that the output voltage will change by 0.1% for a change in input voltage.

6. Ripple Rejection:

   • The TPC8114 provides good ripple rejection, typically 70dB, which helps in maintaining a clean output voltage even with noisy input sources.

7. Operating and Storage Temperature:

   • The device can operate over a temperature range of -40°C to 125°C and can be stored between -65°C and 150°C.
   • Ensure that the operating environment does not exceed these limits to prevent performance degradation or failure.

8. PCB Layout:

   • Place the TPC8114 close to the load to minimize trace resistance and inductance.
   • Use wide traces for power and ground connections to reduce resistance and improve thermal dissipation.
   • Ensure proper heat sinking if the device is expected to dissipate significant power.

9. Protection:

   • The TPC8114 includes internal protection features such as over-temperature shutdown and short-circuit protection.
   • However, it is recommended to include external protection circuits like fuses or current-limiting resistors for added safety.

10. Testing:

    • Before finalizing the design, test the circuit under various conditions, including different loads, input voltages, and temperatures, to ensure reliable operation.

By following these guidelines, you can effectively integrate the TPC8114 into your application and achieve optimal performance.

(For reference only)