Details

---

BUY BTB12-600CWRG https://www.utsource.net/itm/p/11743101.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Rated Off-State Voltage	VDRM	-	600	-	V
Rated RMS On-State Current	IT(RMS)	-	12	-	A
Surge Current (8.3 ms)	ITSM	-	400	-	A
Holding Current	IH	5	-	15	mA
Gate Trigger Current	IGT	5	-	30	mA
Power Dissipation	PD	-	-	100	W	Ta = 25掳C
Junction Temperature	TJ	-	-	125	掳C
Storage Temperature	TSTG	-40	-	125	掳C

Instructions for Use:

1. Mounting:

   • Ensure the BTB12-600CWRG is mounted on a heatsink if operating at or near its maximum power dissipation.
   • Use thermal compound to enhance heat transfer between the device and the heatsink.

2. Voltage and Current Ratings:

   • Do not exceed the rated off-state voltage (600V) or the rated RMS on-state current (12A).
   • For surge currents, ensure that they do not exceed 400A for more than 8.3 ms.

3. Gate Triggering:

   • The gate trigger current should be within the range of 5 to 30 mA to ensure reliable triggering.
   • The holding current should be between 5 and 15 mA to maintain the device in the on state.

4. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 125掳C.
   • Store the device in an environment where the temperature ranges from -40掳C to 125掳C.

5. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent damage from static electricity.

6. Testing:

   • Before installing the device in a circuit, test it to ensure it meets the specified parameters.
   • Use a suitable testing setup to avoid damaging the device during testing.

(For reference only)