Details

---

BUY 75189A-1489A https://www.utsource.net/itm/p/11744013.html

Parameter	Description	Value
Part Number	Full Part Number	75189A-1489A
Type	Component Type	Connector
Series	Series Name	75189A
Gender	Gender	Female
Position	Position	Surface Mount
Pitch	Pitch (mm)	2.00
Number of Positions	Number of Positions	14
Contact Material	Contact Material	Brass
Contact Plating	Contact Plating	Gold over Nickel
Insulation Material	Insulation Material	PBT (Polybutylene Terephthalate)
Operating Temperature	Operating Temperature Range (°C)	-40 to +105
Voltage Rating	Voltage Rating (V)	300 VAC
Current Rating	Current Rating (A)	5 A per circuit
Insertion Force	Insertion Force (N)	2.5 to 3.5
Ejection Force	Ejection Force (N)	1.5 to 2.5
Mounting Style	Mounting Style	SMT (Surface Mount Technology)
Color	Color	Natural (Unpigmented)
RoHS Compliance	RoHS Compliance	Yes
Package Quantity	Package Quantity	500

Instructions for Use:

1. Preparation:

   • Ensure that the PCB is clean and free from any contaminants.
   • Verify that the solder pads on the PCB match the pitch and position of the connector.

2. Placement:

   • Carefully align the connector with the corresponding pads on the PCB.
   • Use a vacuum pickup tool or tweezers to place the connector onto the PCB.

3. Soldering:

   • Preheat the PCB to the recommended temperature to prevent thermal shock.
   • Apply a small amount of solder paste to the pads.
   • Use a reflow soldering process or a hot air soldering station to solder the connector to the PCB.
   • Ensure that all pins are properly soldered and there are no cold solder joints or bridges.

4. Inspection:

   • Visually inspect the solder joints for quality and continuity.
   • Use a multimeter to check for proper electrical connections and ensure there are no shorts.

5. Handling:

   • Handle the connector with care to avoid bending or damaging the pins.
   • Do not apply excessive force when inserting or removing mating connectors.

6. Storage:

   • Store the connectors in a dry, cool place to prevent oxidation and damage.
   • Keep them in their original packaging until ready for use.

7. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible.

(For reference only)