Details

---

BUY FFPF05U60STU https://www.utsource.net/itm/p/11745217.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Rated Voltage	VRMS	-	600	-	V	Continuous RMS voltage
Peak Repetitive Reverse Voltage	VRRM	-	600	-	V	Repetitive peak reverse voltage
Average Rectified Output Current	IAV	-	5	-	A	Non-inductive load, TA = 25掳C
Peak Recurrent Reverse Voltage	VRRP	-	600	-	V	Repetitive peak reverse voltage
Peak Surge Current	ISM	-	300	-	A	tf = 8.3 ms, sin 1/2 wave, TC = 25掳C
Forward Voltage Drop	VF	0.7	1.0	1.2	V	IF = 5 A, TJ = 25掳C
Reverse Recovery Time	trr	-	35	-	ns	IF = 5 A, IR = 50 mA, TJ = 25掳C
Junction Temperature	TJ	-	-	150	掳C	Maximum operating junction temperature
Storage Temperature	TSTG	-40	-	150	掳C	Storage temperature range
Thermal Resistance (Junction to Case)	R胃JC	-	1.5	-	掳C/W	Thermal resistance from junction to case

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Use a thermal compound between the device and the heat sink to improve thermal conductivity.

2. Electrical Connections:

   • Connect the device according to the polarity markings on the package.
   • Ensure that all connections are secure and free from shorts or open circuits.

3. Surge Handling:

   • The device can handle surge currents up to 300 A for short durations (8.3 ms, sine half-wave). Ensure that the circuit design accounts for these conditions.

4. Reverse Voltage:

   • The device is rated for a peak repetitive reverse voltage of 600 V. Ensure that the reverse voltage does not exceed this value to prevent damage.

5. Forward Current:

   • The average rectified output current is 5 A at 25掳C. For higher ambient temperatures, derate the current to ensure reliable operation.

6. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150掳C. Use appropriate cooling methods such as forced air or liquid cooling if necessary.

7. Storage:

   • Store the device in a dry environment with temperatures between -40掳C and 150掳C to prevent damage.

8. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the leads.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

(For reference only)