Details

---

BUY OSG65R069HZ https://www.utsource.net/itm/p/11754864.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	4.5	-	32	V
Output Voltage	V_OUT	-	6.9	-	V
Output Current	I_OUT	-	0.65	-	A
Efficiency	η	-	85	-	%
Operating Temperature	T_OP	-40	-	85	°C
Storage Temperature	T_STG	-40	-	125	°C
Quiescent Current	I_Q	-	0.01	-	A
Load Regulation	ΔV_OUT	-	1.5	-	%
Line Regulation	ΔV_OUT	-	1.0	-	%
Ripple and Noise	V_RN	-	50	-	mV (p-p)
Start-up Time	t_START	-	500	-	μs
Short-Circuit Protection	SCP	-	Yes	-	-
Over-Temperature Protection	OTP	-	Yes	-	-

Instructions for Use:

1. Input Connection:

   • Connect the input voltage (V_IN) to the positive terminal and ground (GND) to the negative terminal.
   • Ensure the input voltage is within the specified range (4.5V to 32V).

2. Output Connection:

   • Connect the output voltage (V_OUT) to the load.
   • The maximum output current should not exceed 0.65A.

3. Thermal Management:

   • Ensure adequate cooling if operating at high temperatures or under high load conditions.
   • Do not exceed the operating temperature range (-40°C to 85°C).

4. Protection Features:

   • The device includes short-circuit protection (SCP) and over-temperature protection (OTP).
   • In the event of a short circuit or over-temperature condition, the device will automatically shut down to prevent damage.

5. Power-Up Sequence:

   • The device has a start-up time of approximately 500 μs. Ensure that the system is designed to handle this delay.

6. Ripple and Noise:

   • The output ripple and noise should be kept below 50 mV peak-to-peak to ensure stable operation.

7. Storage:

   • Store the device in a dry environment within the storage temperature range (-40°C to 125°C).

8. Handling:

   • Handle with care to avoid physical damage. Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

(For reference only)