Details

---

BUY MCP6002T-E/SN https://www.utsource.net/itm/p/11756795.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage Range	VDD	Continuous Operation	1.8	-	5.5	V
Quiescent Current	IQ	Each Amplifier	-	1.3	-	μA
Input Offset Voltage	VOS	25°C	-2	0	2	mV
Input Bias Current	IB	25°C, Common-Mode Voltage = 2.5V	-	20	-	pA
Input Voltage Range	VCM	VDD = 5V	0	-	5	V
Output Voltage Swing	VOUT	No Load, VDD = 5V	0.3	-	4.7	V
Slew Rate	SR	VDD = 5V	-	0.4	-	V/μs
Bandwidth (Unity Gain)	fT	VDD = 5V	-	1.2	-	MHz
Gain Bandwidth Product	GBP	VDD = 5V	-	1.2	-	MHz
Common-Mode Rejection Ratio	CMRR	25°C, VDD = 5V	-	80	-	dB
Power Supply Rejection Ratio	PSRR	25°C, VDD = 5V	-	80	-	dB

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (V_DD) is within the range of 1.8V to 5.5V.
   • Connect the positive supply to V_DD and the negative supply to ground (GND).

2. Input Signals:

   • The input voltage range should be between 0V and V_DD.
   • Avoid exceeding the supply voltage limits to prevent damage to the device.

3. Output Configuration:

   • The output voltage swing is from 0.3V to 4.7V when V_DD is 5V.
   • Ensure the load does not draw excessive current that could cause the output to drop below the specified range.

4. Biasing and Offset:

   • The input bias current is very low (20pA at 25°C), making it suitable for high-impedance sources.
   • The input offset voltage is ±2mV at 25°C, which can be minimized by using matched resistors in the feedback network.

5. Stability and Performance:

   • The unity gain bandwidth is 1.2MHz, and the gain-bandwidth product is also 1.2MHz.
   • The common-mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) are both 80dB at 25°C, ensuring good performance in noisy environments.

6. Slew Rate:

   • The slew rate is 0.4V/μs, which is suitable for most general-purpose applications but may limit performance in high-speed circuits.

7. Operating Temperature:

   • The device is designed to operate over a temperature range of -40°C to +125°C, making it suitable for a wide range of environmental conditions.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow proper soldering techniques to ensure reliable connections and avoid thermal stress.

By following these guidelines, you can ensure optimal performance and reliability of the MCP6002T-E/SN operational amplifier.

(For reference only)