Details

---

BUY 88E1512-NNP2 https://www.utsource.net/itm/p/11767456.html

Parameter	Description	Value
Device Name	Ethernet Controller IC	88E1512-NNP2
Package	Package Type	QFN-40 (6x6)
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Supply Voltage	Operating Supply Voltage	3.3V ± 5%
Data Rate	Maximum Data Rate	10/100/1000 Mbps
Interface	Interface to Host	PCI Express Gen 1 x1
PHY Type	Physical Layer Interface	10/100/1000BASE-T
MAC Address	Built-in MAC Address	Yes
Wake-on-LAN	Wake-on-LAN Support	Yes
LEDs	LED Indicators	Link/Activity, 10/100/1000 Mbps
Compliance	Compliance with Standards	IEEE 802.3, 802.3u, 802.3ab
Power Consumption	Typical Power Consumption	350 mW (Active), 10 mW (Low Power Mode)
ESD Protection	Electrostatic Discharge Protection	±2 kV HBM, ±1 kV CDM
RoHS Compliance	RoHS Compliant	Yes

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of 3.3V ± 5%.
   • Connect the power supply to the VCC and GND pins as indicated in the datasheet.

2. Installation:

   • Mount the 88E1512-NNP2 on a PCB using the QFN-40 (6x6) package.
   • Follow the recommended PCB layout guidelines provided in the datasheet to ensure optimal performance.

3. Configuration:

   • Configure the device using the PCI Express interface.
   • Use the onboard EEPROM or external configuration to set up the MAC address and other parameters.

4. Firmware Update:

   • If required, update the firmware using the provided tools and software.
   • Follow the firmware update procedure outlined in the user manual.

5. Testing:

   • Test the device for proper operation by connecting it to a network and verifying link status and data transmission.
   • Use diagnostic tools to monitor and troubleshoot any issues.

6. Environmental Considerations:

   • Store and operate the device within the specified temperature range to avoid damage.
   • Ensure the device is protected from ESD by following proper handling procedures.

7. Documentation:

   • Refer to the datasheet and user manual for detailed information on pinouts, timing diagrams, and advanced features.

(For reference only)