Details

---

BUY TMPZ84C011BF-6 https://www.utsource.net/itm/p/11767998.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.0	3.3	5.5	V
Operating Temperature	Ta	-40		85	°C
Storage Temperature	Tstg	-55		150	°C
Maximum Clock Frequency	fCLK		20		MHz
Input Low Voltage	VIL	0		0.8	V
Input High Voltage	VIH	2.0		Vcc	V
Output Low Voltage	VOL	0	0.4	0.6	V (IOL=4mA)
Output High Voltage	VOH	2.4	3.3	Vcc	V (IOH=-4mA)
Static Current	ICC		1.5	5	mA
Power Consumption	Pd		5.5	27.5	mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.0V to 5.5V.
   • Connect a bypass capacitor (0.1μF) close to the power pins to filter out noise.

2. Temperature Considerations:

   • The device operates reliably between -40°C and 85°C ambient temperature.
   • Store the device between -55°C and 150°C.

3. Clock Frequency:

   • The maximum clock frequency (fCLK) is 20 MHz. Ensure the clock signal is stable and clean to avoid timing issues.

4. Input Levels:

   • Input signals should be within the specified input low (VIL) and high (VIH) voltage levels.
   • For VIL, ensure the input voltage does not exceed 0.8V.
   • For VIH, ensure the input voltage is at least 2.0V and can go up to Vcc.

5. Output Levels:

   • The output low voltage (VOL) should not exceed 0.6V when sinking 4mA.
   • The output high voltage (VOH) should be at least 2.4V and can go up to Vcc when sourcing -4mA.

6. Current and Power:

   • The typical static current (ICC) is 1.5mA, with a maximum of 5mA.
   • The power consumption (Pd) is typically 5.5mW, with a maximum of 27.5mW.

7. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection.
   • Follow recommended soldering profiles to prevent thermal stress during assembly.

8. Layout:

   • Place the device in a location that allows for adequate heat dissipation if operating near the upper limits of power consumption.
   • Ensure proper grounding and decoupling to maintain signal integrity.

(For reference only)