Details

---

BUY TPS1H100AQPWPRQ1 https://www.utsource.net/itm/p/11769091.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	VIN	4.5	-	36	V
Output Current	IOUT	-	2.1	2.1	A	Continuous
Peak Output Current	IPEAK	-	-	5	A
ON-State Resistance	RDS(ON)	-	10	15	mΩ	@ VGS = 4.5V, ID = 2.1A
Turn-On Delay Time	tD(on)	-	150	-	ns	@ VGS = 4.5V, ID = 2.1A
Turn-Off Delay Time	tD(off)	-	150	-	ns	@ VGS = 4.5V, ID = 2.1A
Maximum Junction Temperature	TJ(max)	-	-	150	°C
Storage Temperature Range	TSTG	-40	-	125	°C
Operating Temperature Range	TOPR	-40	-	125	°C

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage (VIN) is within the specified range of 4.5V to 36V.
   • The device can handle a continuous output current of up to 2.1A and a peak current of up to 5A.

2. Thermal Management:

   • Monitor the junction temperature (TJ) to ensure it does not exceed 150°C.
   • Use appropriate heat sinks or cooling methods if necessary to maintain the operating temperature within the specified range (-40°C to 125°C).

3. Switching Characteristics:

   • The turn-on delay time (tD(on)) and turn-off delay time (tD(off)) are both approximately 150ns under typical conditions.
   • Ensure the gate-source voltage (VGS) is at least 4.5V to achieve the specified ON-state resistance (RDS(ON)).

4. Storage and Handling:

   • Store the device in a dry environment with temperatures between -40°C and 125°C.
   • Handle the device with care to avoid damage from electrostatic discharge (ESD).

5. Circuit Design:

   • Use appropriate decoupling capacitors near the power supply pins to reduce noise and improve stability.
   • Ensure the layout minimizes parasitic inductance and resistance to optimize performance.

6. Safety and Compliance:

   • Follow all relevant safety guidelines and compliance standards when designing circuits that use this device.
   • Refer to the datasheet for detailed information on absolute maximum ratings and recommended operating conditions.

(For reference only)