Details

---

BUY 2SK791 https://www.utsource.net/itm/p/11772764.html

Parameter	Symbol	Min	Typical	Max	Unit
Drain-Source Voltage	V(DS)	-	-	300	V
Gate-Source Voltage	V(GS)	-	-	卤20	V
Drain Current	I(D)	-	-	5	A
Transconductance	gfs	-	3.0	-	S
Input Capacitance	Ciss	-	280	-	pF
Output Capacitance	Coss	-	240	-	pF
Reverse Transfer	Crss	-	160	-	pF
Threshold Voltage	Vth	2.0	4.0	6.0	V
On-State Resistance	Rds(on)	-	0.6	-	惟
Gate Charge	Qg	-	150	-	nC
Total Power Dissipation	Ptot	-	-	60	W
Junction Temperature	Tj	-	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the 2SK791 with care to avoid damage to the leads and the semiconductor structure.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply thermal paste or a thermal pad between the device and the heat sink to improve thermal conductivity.
   • Tighten the mounting screws to the recommended torque to ensure good thermal contact without causing mechanical stress.

3. Biasing:

   • The gate-source voltage (V(GS)) should be kept within the specified range of 卤20V to avoid damaging the gate oxide.
   • The drain-source voltage (V(DS)) should not exceed 300V to prevent breakdown.

4. Operating Conditions:

   • The drain current (I(D)) should not exceed 5A to prevent overheating and potential damage.
   • The junction temperature (Tj) should be kept below 150掳C to ensure reliable operation and longevity.

5. Thermal Management:

   • Use a suitable heat sink to dissipate the power generated by the device, especially when operating at high currents or high frequencies.
   • Monitor the temperature of the device during operation to ensure it remains within safe limits.

6. Storage:

   • Store the 2SK791 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the devices in their original packaging until ready for use to protect them from environmental factors.

7. Testing:

   • Before mounting the device on a circuit board, test its parameters using a suitable test setup to ensure it meets the specifications.
   • Perform regular checks and maintenance to ensure the device continues to function correctly over time.

(For reference only)