Details

---

BUY BTA16-600BRG. https://www.utsource.net/itm/p/11773296.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Rated RMS Current	IT(RMS)	-	16	-	A
Peak On-State Current	I(TM)	-	-	100	A	tp = 10 ms, sin 120掳
On-State Voltage	V(TM)	1.0	1.4	2.0	V	IT(RMS) = 16 A, Tj = 25掳C
Holding Current	I(H)	10	-	30	mA	Tj = 25掳C
Gate Trigger Current	I(GT)	5	-	50	mA	V(GT) = 5 V, IT(RMS) = 16 A
Gate Trigger Voltage	V(GT)	1.5	-	2.5	V	I(GT) = 50 mA, IT(RMS) = 16 A
Maximum Junction Temperature	Tjmax	-	-	125	掳C
Storage Temperature Range	Tstg	-40	-	125	掳C

Instructions for BTA16-600BRG:

1. Mounting and Handling:

   • Ensure the device is handled with care to avoid mechanical stress.
   • Use a heat sink if operating at high currents to maintain junction temperature within safe limits.

2. Electrical Connections:

   • Connect the main terminals (MT1 and MT2) to the load and power supply.
   • Connect the gate (G) and cathode (K) for triggering the triac.
   • Ensure all connections are secure and free from short circuits.

3. Triggering:

   • Apply a pulse to the gate terminal to trigger the triac.
   • The gate trigger current (I(GT)) should be within the specified range to ensure reliable operation.
   • The gate trigger voltage (V(GT)) should also be within the specified range.

4. Dissipation Management:

   • Monitor the junction temperature (Tj) to ensure it does not exceed the maximum rated temperature (Tjmax).
   • Use appropriate cooling methods such as heatsinks or forced air cooling if necessary.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive currents.
   • Consider using a fuse or a current-limiting resistor in series with the load.

6. Storage and Operating Environment:

   • Store the device in a dry, cool place away from direct sunlight.
   • Operate the device within the specified storage temperature range (Tstg).

7. Testing:

   • Before final assembly, test the device under controlled conditions to ensure it meets the required specifications.
   • Use a suitable test circuit to verify the on-state and off-state characteristics.

8. Compliance:

   • Ensure that the device complies with relevant safety and regulatory standards for the intended application.

By following these instructions, you can ensure reliable and safe operation of the BTA16-600BRG triac.

(For reference only)