Details

---

BUY HY3410P TO-220 100V140A REPLACEABLE IRFB4310ZPBF IRFB4310PBF https://www.utsource.net/itm/p/11773374.html
domestic

Parameter	Value
Part Number	HY3410P
Package Type	TO-220
Voltage Rating (Vds)	100V
Current Rating (Id)	140A
Power Dissipation	150W
Rds(on) @ Vgs=10V	2.5m惟
Gate Charge (Qg)	110nC
Thermal Resistance	R胃JA = 62掳C/W
Operating Temperature	-55掳C to +175掳C
Replacement For	IRFB4310ZPBF, IRFB4310PBF

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid static discharge and physical damage.

2. Mounting:

   • Ensure proper heat sinking to maintain thermal resistance within specified limits.
   • Use a thermal compound between the device and the heatsink for optimal heat dissipation.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Use a temperature-controlled soldering iron and ensure the soldering time does not exceed 3 seconds per joint.
   • Allow the device to cool naturally after soldering.

4. Electrical Connections:

   • Connect the Drain (D), Source (S), and Gate (G) terminals correctly.
   • Ensure the Gate is driven with a clean, fast-switching signal to minimize switching losses.

5. Testing:

   • Test the device in a controlled environment to verify its performance.
   • Monitor the temperature and current to ensure they remain within safe operating limits.

6. Safety:

   • Always use appropriate safety equipment when handling high-voltage circuits.
   • Follow all relevant electrical safety guidelines and regulations.

7. Troubleshooting:

   • If the device fails, check for overcurrent, overheating, or incorrect wiring.
   • Replace the device if it shows signs of damage or malfunction.

(For reference only)