Details

---

BUY HY4004P HY4004 40V208A REPLACEABLE IRFB7446 IRF1404Z IRF2204 https://www.utsource.net/itm/p/11776778.html
domestic

Parameter	HY4004P / HY4004 (40V, 208A)
Absolute Maximum Ratings
Drain-Source Voltage (VDS)	40V
Gate-Source Voltage (VGS)	卤20V
Continuous Drain Current (ID)	208A (at 25掳C Tc)
Pulse Drain Current (IDM)	360A (10渭s, 1% Duty Cycle)
Power Dissipation (PD)	150W (at 25掳C Tc)
Junction Temperature (TJ)	-55掳C to +150掳C
Storage Temperature (TSTG)	-55掳C to +150掳C
Electrical Characteristics
Input Capacitance (Ciss)	2400pF (VDS = 10V, VGS = 0V)
Output Capacitance (Coss)	1000pF (VDS = 10V, VGS = 0V)
Reverse Transfer Capacitance (Crss)	600pF (VDS = 10V, VGS = 0V)
Gate Charge (Qg)	115nC (VGS = 10V)
Threshold Voltage (VGS(th))	2.0V to 4.0V (ID = 250渭A)
On-State Resistance (RDS(on))	3.5m惟 (VGS = 10V, ID = 208A)
Thermal Characteristics
Junction-to-Case Thermal Resistance (R胃JC)	0.45掳C/W
Junction-to-Ambient Thermal Resistance (R胃JA)	62掳C/W (Heatsink)
Package Information
Package Type	TO-220
Pin Configuration	Drain (D), Source (S), Gate (G)

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain junction temperature within safe limits.
   • Handle with care to avoid damage to the gate and other sensitive components.

2. Biasing and Operation:

   • Apply a gate-source voltage (VGS) of at least 10V to ensure full enhancement and minimize on-state resistance.
   • Keep the gate-source voltage within the specified range to avoid damage.

3. Thermal Management:

   • Use a heatsink with adequate thermal conductivity to dissipate heat effectively.
   • Monitor the junction temperature to prevent overheating.

4. Storage:

   • Store in a dry, cool environment to prevent moisture damage.
   • Avoid exposure to extreme temperatures and humidity.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use appropriate test equipment and follow safety guidelines.

6. Safety:

   • Always use protective equipment when handling high-voltage or high-current circuits.
   • Follow all relevant safety standards and regulations.

(For reference only)