Details

---

BUY STW26NM60N 26NM60N TO-247 20A 600V https://www.utsource.net/itm/p/11777103.html

Parameter	Value	Unit
Part Number	STW26NM60N	-
Package	TO-247	-
Maximum Drain-Source Voltage (Vds)	600	V
Continuous Drain Current (Id) at 25掳C	20	A
Continuous Drain Current (Id) at 100掳C	13.5	A
Gate-Source Voltage (Vgs)	卤20	V
Gate Charge (Qg)	85	nC
Input Capacitance (Ciss)	2400	pF
Output Capacitance (Coss)	220	pF
Reverse Transfer Capacitance (Crss)	210	pF
Total Power Dissipation (Ptot) at 25掳C	175	W
Total Power Dissipation (Ptot) at 100掳C	100	W
Junction Temperature (Tj)	-55 to 175	掳C
Storage Temperature (Tstg)	-55 to 150	掳C
Thermal Resistance, Junction to Case (Rthjc)	0.55	掳C/W
Thermal Resistance, Junction to Ambient (Rthja)	2.5	掳C/W

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent damage from static electricity.

2. Mounting:

   • Ensure proper thermal management by using a heatsink if necessary.
   • Apply thermal paste between the device and the heatsink for better heat dissipation.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (Vgs) does not exceed the maximum rating of 卤20V.
   • Use short and thick wires to minimize inductance and resistance.

4. Operating Conditions:

   • Do not exceed the maximum drain-source voltage (Vds) of 600V.
   • Ensure the continuous drain current (Id) does not exceed 20A at 25掳C or 13.5A at 100掳C.
   • Monitor the junction temperature (Tj) to ensure it stays within the range of -55掳C to 175掳C.

5. Storage:

   • Store the device in a dry and cool place.
   • Keep the device away from direct sunlight and sources of heat.

6. Testing:

   • Perform initial testing at low power levels to ensure proper operation.
   • Gradually increase the power levels while monitoring temperature and performance.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate protective equipment and follow all relevant safety standards.

(For reference only)