Details

---

BUY IXYN100N65A3 https://www.utsource.net/itm/p/12357479.html

Parameter	Symbol	Value	Unit	Notes
Maximum Drain-Source Voltage	VDS(max)	650	V	Continuous
Maximum Gate-Source Voltage	VGS(max)	±20	V	Continuous
Maximum Drain Current (Tc = 25°C)	ID(max)	100	A	Pulse (10 μs, 1% duty cycle)
Maximum Drain Current (Tc = 100°C)	ID(max)	70	A	Pulse (10 μs, 1% duty cycle)
Maximum Power Dissipation (Tc = 25°C)	PTOT(max)	300	W	Continuous
Maximum Junction Temperature	TJ(max)	150	°C	-
Storage Temperature Range	TSTG	-55 to 150	°C	-
Thermal Resistance, Junction to Case	Rth(j-c)	0.5	K/W	-
Total Gate Charge	QG	180	nC	VGS = 15 V, ID = 50 A
Input Capacitance	Ciss	4400	pF	VDS = 650 V, f = 1 MHz
Output Capacitance	Coss	160	pF	VDS = 650 V, f = 1 MHz
Reverse Transfer Capacitance	Crss	120	pF	VDS = 650 V, f = 1 MHz

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place within the temperature range specified.
   • Handle with care to avoid damage to the pins and body.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature below the maximum limit.
   • Use thermal paste or thermal interface material between the device and the heat sink for better thermal performance.

3. Electrical Connections:

   • Apply gate voltage carefully to avoid exceeding the maximum gate-source voltage.
   • Use short leads to minimize parasitic inductance and capacitance.
   • Ensure the drain and source connections are secure and have low resistance.

4. Operating Conditions:

   • Do not exceed the maximum ratings under any operating conditions.
   • For continuous operation, ensure that the power dissipation does not exceed the rated value at the specified case temperature.
   • Monitor the junction temperature to prevent overheating, which can lead to premature failure.

5. Testing and Troubleshooting:

   • Use appropriate test equipment and methods to verify the device parameters.
   • If the device fails to meet specifications, check for proper installation, correct voltage levels, and adequate cooling.

6. Safety Precautions:

   • Always use appropriate safety gear when handling high-voltage circuits.
   • Follow all local and international electrical safety standards and regulations.

(For reference only)