Details

---

BUY ADC10154CIWM https://www.utsource.net/itm/p/12357526.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	2.7	-	5.5	V
Operating Temperature	Toperating	-40	-	85	°C
Input Voltage Range	VIN	0	-	VCC	V
Conversion Time (Max)	tconv	-	-	13	μs
Resolution	N	-	10	-	bits
Differential Inputs	-	-	1	-	ch
Single-Ended Inputs	-	-	8	-	ch
Power Consumption	ICC	-	200	-	μA
Package Type	-	-	TSSOP-14	-	-

Instructions for ADC10154CIWM

1. Power Supply:

   • Connect the VCC pin to a stable power supply within the range of 2.7V to 5.5V.
   • Ensure the GND pin is connected to a common ground.

2. Input Configuration:

   • The ADC10154CIWM supports both differential and single-ended input modes.
   • For differential mode, connect the differential input signals to the appropriate pins.
   • For single-ended mode, connect the analog input signals to the single-ended input pins.

3. Conversion Control:

   • Initiate a conversion by setting the appropriate control signals or using the serial interface.
   • The conversion time is typically 13 μs at maximum.

4. Data Output:

   • Read the converted data from the output pins or via the serial interface.
   • The resolution of the ADC is 10 bits.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C to ensure reliable performance.

6. Power Consumption:

   • The typical power consumption is 200 μA. Ensure the power supply can handle this current.

7. Package Handling:

   • The ADC10154CIWM comes in a TSSOP-14 package. Handle with care to avoid damage to the pins and the device.

8. Grounding and Decoupling:

   • Use proper grounding techniques and place decoupling capacitors close to the VCC and GND pins to minimize noise and ensure stable operation.

(For reference only)