Details

---

BUY MKE16Z64VLF4 https://www.utsource.net/itm/p/12357908.html

Parameter	Description	Value/Options
Device	Microcontroller	MKE16Z64VLF4
Family	Kinetis E-Series	Kinetis E
Architecture	ARM Cortex-M0+	32-bit CPU core
Flash Memory	Size	64 KB
RAM	Size	16 KB
Voltage (VDD)	Operating Supply Voltage	1.71 V to 3.6 V
Clock Speed	Maximum Frequency	48 MHz
Temperature Range	Operating Temperature	-40°C to +85°C
Package	Type	LQFP-48
Pin Count	Number of Pins	48
Analog Inputs	ADC Channels	12-bit, up to 16 channels
Communication Interfaces	Available Interfaces	UART, SPI, I2C, CAN
Timers	Types and Quantity	Up to 4 general-purpose timers
Watchdog Timer	Availability	Yes
Low Power Modes	Types	VLPR, LLS, STOP, VLPW
Capacitive Touch Sensing	Support	Yes, with mTouch technology
Security Features	Options	Write protection for flash memory

Instructions for Use:

1. Power Supply Setup:

   • Ensure the supply voltage is within the specified range of 1.71 V to 3.6 V.
   • Connect a stable power source to the VDD and GND pins.

2. Clock Configuration:

   • Configure the internal or external clock source as needed.
   • Set the system clock frequency up to 48 MHz for optimal performance.

3. Programming Interface:

   • Use an appropriate programming interface such as SWD or JTAG for firmware upload.
   • Follow the manufacturer’s guidelines for using the provided development tools.

4. Peripheral Initialization:

   • Initialize communication interfaces like UART, SPI, and I2C according to your application requirements.
   • Configure ADC channels for analog signal processing if required.

5. Low-Power Mode Management:

   • Implement low-power modes (VLPR, LLS, STOP, VLPW) as necessary to optimize power consumption.
   • Ensure proper wake-up configurations are set for these modes.

6. Security Measures:

   • Utilize write protection features to secure the flash memory against unauthorized access or modification.

7. Capacitive Touch Integration:

   • Integrate capacitive touch sensing features using the onboard mTouch technology for user interface enhancements.

8. Development Environment:

   • Utilize development environments and tools recommended by NXP, such as MCUXpresso IDE, for coding and debugging.

For detailed specifications and further instructions, refer to the official datasheet and application notes provided by NXP Semiconductors.

(For reference only)