Details

---

BUY CDP68HC68T1E https://www.utsource.net/itm/p/12358654.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating voltage range	2.0	-	5.5	V
Operating Temperature	Temperature range for operation	-40	-	85	掳C
Storage Temperature	Temperature range for storage	-65	-	150	掳C
Clock Frequency	Maximum clock frequency	-	-	16	MHz
I/O Voltage	Input/output voltage range	2.0	-	5.5	V
Standby Current	Current consumption in standby mode	-	0.1	1.0	渭A
Active Current	Current consumption in active mode	-	10	30	mA
RAM Size	On-chip RAM size	-	-	256	bytes
ROM Size	On-chip ROM size	-	-	8	KB
Package Type	Housing type	-	-	DIP-40	-
Pin Count	Number of pins	-	-	40	-

Instructions:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Clock Configuration:

   • Use an external crystal or oscillator to provide the clock signal.
   • The maximum clock frequency is 16 MHz.

3. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device between -65掳C and 150掳C.

4. I/O Handling:

   • Ensure all input and output voltages are within the range of 2.0V to 5.5V.
   • Avoid connecting I/O pins directly to voltages outside this range without appropriate protection.

5. Current Consumption:

   • In standby mode, the current consumption should be less than 1.0 渭A.
   • In active mode, the current consumption can range from 10 mA to 30 mA.

6. Memory Usage:

   • Utilize the 256 bytes of on-chip RAM for data storage.
   • Use the 8 KB of on-chip ROM for program storage.

7. Package Handling:

   • Handle the DIP-40 package with care to avoid damaging the pins.
   • Ensure proper soldering techniques to maintain electrical connections.

8. Programming:

   • Use appropriate programming tools and software to load and execute code on the device.
   • Refer to the datasheet for specific programming protocols and pin configurations.

(For reference only)