Details

---

BUY M41T81SM6F https://www.utsource.net/itm/p/12360102.html

Parameter	Description	Value/Range
Operating Voltage	Supply voltage range for the device operation	1.6V to 5.5V
Operating Temperature	Temperature range for reliable operation	-40°C to +85°C
Accuracy	Accuracy of timekeeping	±2 ppm at 25°C
Oscillator Frequency	Internal oscillator frequency	32.768 kHz
I2C Interface	Communication interface type	I2C
Supply Current	Typical current consumption in active mode	200 nA (typical)
Package Type	Physical package of the component	SOIC-8
Features	Key features of the device	RTC, Power Management, Alarm

Instructions for Use:

1. Power Supply Connection: Connect the VCC pin to a power supply within the operating voltage range (1.6V to 5.5V). Ensure the GND pin is connected to ground.

2. Communication Setup: The M41T81SM6F uses an I2C interface for communication. Connect the SDA and SCL pins to the corresponding I2C lines on your microcontroller or system.

3. Initialization: Upon powering up, initialize the RTC by setting the correct date and time using the appropriate I2C commands.

4. Timekeeping: Once initialized, the device will keep accurate time using its internal 32.768 kHz oscillator. Periodically check and update the time as necessary.

5. Alarm Functionality: Configure the alarm registers to set up alarms. The device can generate an interrupt when the alarm condition is met.

6. Power Management: Utilize the power management features to handle power transitions gracefully, ensuring continuous timekeeping even during power interruptions if backed by a battery.

7. Handling: Handle the device with care, especially noting the operating temperature range (-40°C to +85°C), to avoid damage from extreme conditions.

(For reference only)