Details

---

BUY RM10TA-2H https://www.utsource.net/itm/p/12360481.html

Parameter	Description	Value
Part Number	Device Part Number	RM10TA-2H
Type	Relay Type	SPDT
Coil Voltage	Nominal Coil Voltage	5V DC
Coil Resistance	Coil Resistance	70Ω
Contact Form	Contact Configuration	Single Pole Double Throw (SPDT)
Contact Material	Contact Material	Silver Alloy
Contact Rating	Maximum Switching Power	30W
Insulation Voltage	Dielectric Strength Between Contacts	1000V AC RMS for 1 minute
Operating Temp.	Operating Temperature Range	-40°C to +85°C
Storage Temp.	Storage Temperature Range	-40°C to +85°C
Mechanical Life	Mechanical Operation Life	10 million operations
Electrical Life	Electrical Operation Life at Rated Load	100,000 operations
Dimensions	Product Dimensions (L x W x H)	17.5mm x 12.5mm x 10.5mm
Weight	Approximate Weight	5g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat surface.
   • Use appropriate mounting hardware to secure the relay in place.

2. Coil Connection:

   • Connect the coil terminals to the specified voltage source.
   • Verify polarity if using a DC supply.

3. Contact Wiring:

   • Wire the common (COM), normally open (NO), and normally closed (NC) contacts as per circuit requirements.
   • Ensure all connections are tight and secure to prevent arcing or poor contact.

4. Testing:

   • Before operation, test the relay under no-load conditions to ensure correct switching action.
   • Gradually introduce load to the rated capacity while monitoring performance.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Keep the relay clean and free from dust and debris.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive substances.
   • Handle with care to avoid mechanical shock or damage.

(For reference only)