Details

---

BUY ISL3295EIHZ-T https://www.utsource.net/itm/p/12361032.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7		5.5	V
Supply Current	IDD	Quiescent, VOUT = VDD/2		10		μA
Input Offset Voltage	VOS		-3	0	3	mV
Common-Mode Rejection Ratio	CMRR	f = 1 kHz		86		dB
Power Supply Rejection Ratio	PSRR	f = 1 kHz		86		dB
Output Voltage Swing	VOSWNG	RL = 10 kΩ	0.2		VDD-0.2	V
Bandwidth	BW	Small Signal		1.2		MHz
Slew Rate	SR			0.4		V/μs
Gain	AV	Open Loop		100		kV/V

Instructions for ISL3295EIHZ-T

1. Power Supply Connections:

   • Connect the supply voltage (VDD) between the VDD and GND pins. Ensure the voltage is within the operating range of 2.7V to 5.5V.

2. Input Connections:

   • Apply input signals to the IN+ and IN- pins. Keep in mind the common-mode input voltage range relative to the supply voltage.

3. Output Connections:

   • Connect the output pin (OUT) to your load or next stage circuitry. The output can swing from 0.2V above ground to 0.2V below the supply voltage.

4. Biasing and Stability:

   • For optimal performance, ensure proper biasing and stability conditions are met. This may include using appropriate feedback networks and capacitors as recommended by the datasheet.

5. Operating Temperature Range:

   • The device is specified to operate over a temperature range of -40°C to +85°C. Ensure that the operating environment does not exceed these limits.

6. Handling Precautions:

   • Handle the component with care to avoid damage from electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.

7. Mounting:

   • Follow standard surface-mount technology (SMT) procedures for mounting the component on a PCB. Ensure good solder connections to all pins.

For detailed specifications and application notes, refer to the full datasheet provided by the manufacturer.

(For reference only)