Details

---

BUY LTC2875IS8#PBF https://www.utsource.net/itm/p/12361800.html

Parameter	Description	Conditions	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage range		2.7		5.5	V
Quiescent Current	Supply current with no load	VIH = VCC, VIL = GND		160		μA
Output Short-Circuit	Output short-circuit duration				Continuous
Input Low Voltage (VIL)	Maximum input low-voltage level	VIH = VCC			0.8	V
Input High Voltage (VIH)	Minimum input high-voltage level	VIL = GND	2.0			V
Propagation Delay	Time delay from input edge to output edge			3.9		ns
Power-Down Mode Current	Supply current in power-down mode	PD = LOW		0.5		μA
Output Drive Capability	Output drive capability		±4			mA

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
2. Quiescent Current: Monitor the quiescent current which should be around 160μA under normal operating conditions.
3. Short-Circuit Protection: The device can handle continuous short circuits on the output.
4. Input Logic Levels:
   • For a logic low input, ensure the voltage does not exceed 0.8V.
   • For a logic high input, ensure the voltage is at least 2.0V.
5. Propagation Delay: Expect a propagation delay of approximately 3.9ns.
6. Power-Down Mode: To minimize power consumption, use the power-down feature by setting PD to LOW, reducing the supply current to about 0.5μA.
7. Output Drive: The device can source or sink up to ±4mA.

For detailed specifications and more advanced applications, refer to the datasheet provided by the manufacturer.

(For reference only)