Details

---

BUY SKIIP28ANB16V1 https://www.utsource.net/itm/p/12374229.html

Parameter	Description	Min	Typ	Max	Unit
VDC	DC Input Voltage	500	-	800	V
IC	Continuous Collector Current	-	1600	-	A
IC,peak	Peak Collector Current (10 μs, 1% duty cycle)	-	3200	-	A
Tj	Junction Temperature	-40	-	175	°C
Rth(j-c)	Thermal Resistance, Junction to Case	-	0.14	-	K/W
Rth(c-s)	Thermal Resistance, Case to Heat Sink	-	0.01	-	K/W
fsw	Switching Frequency	-	-	20	kHz
VCE(sat)	Collector-Emitter Saturation Voltage at IC = 1600 A, VGE = 15 V	-	2.0	-	V
Eon	Turn-On Energy at IC = 1600 A, VDC = 800 V	-	150	-	mJ
Eoff	Turn-Off Energy at IC = 1600 A, VDC = 800 V	-	120	-	mJ
td(on)	Turn-On Delay Time	-	0.15	-	μs
tr	Rise Time	-	0.3	-	μs
td(off)	Turn-Off Delay Time	-	0.15	-	μs
tf	Fall Time	-	0.3	-	μs

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Use thermal paste or thermal interface material between the module and the heat sink to improve thermal conductivity.

2. Electrical Connections:

   • Connect the DC input voltage within the specified range (500 V to 800 V).
   • Ensure that the continuous collector current does not exceed 1600 A.
   • For peak currents, do not exceed 3200 A for durations of 10 μs with a 1% duty cycle.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 175°C.
   • Use the provided thermal resistance values to calculate the required heat sink size and cooling method.

4. Switching Operations:

   • Operate within the switching frequency limit of up to 20 kHz.
   • Be aware of the turn-on and turn-off energies to optimize the drive circuit and minimize power losses.

5. Storage and Handling:

   • Store the module in a dry, cool place away from direct sunlight and corrosive environments.
   • Handle with care to avoid mechanical damage or electrostatic discharge (ESD).

6. Safety Precautions:

   • Follow all safety guidelines and regulations when handling high-voltage and high-current components.
   • Ensure proper grounding and isolation to prevent electrical hazards.

(For reference only)