Details

---

BUY VP101-3BA https://www.utsource.net/itm/p/12374908.html

Parameter	Value/Description
Part Number	VP101-3BA
Type	Phototransistor Output Optocoupler
Isolation Voltage	5300 Vrms (1 minute)
Collector-Emitter Voltage (VCEO)	70 V
Emitter-Collector Voltage (VECS)	70 V
Collector Current (IC)	50 mA
Forward Current (IF)	60 mA
Forward Voltage (VF)	1.2 V (Typical at IF = 20 mA)
Current Transfer Ratio (CTR)	20% to 400% (Typical at IF = 5 mA, VCE = 5 V)
Response Time (tr, tf)	2 μs (Typical)
Operating Temperature Range	-40°C to +100°C
Storage Temperature Range	-40°C to +125°C
Package Type	DIP-4
Pin Configuration	1: Anode, 2: Cathode, 3: Collector, 4: Emitter

Instructions for Use:

1. Handling Precautions: Handle with care to avoid damage. Avoid exposure to excessive static electricity.
2. Mounting: Ensure proper alignment of the pins during mounting. Use a heat sink if necessary to dissipate heat.
3. Soldering: Solder at a temperature not exceeding 260°C for no more than 10 seconds per pin.
4. Electrical Connections: Connect the anode (pin 1) to the positive side of the input circuit and the cathode (pin 2) to the negative side. Connect the collector (pin 3) to the output circuit and the emitter (pin 4) to ground.
5. Operational Parameters: Ensure that the operating conditions do not exceed the maximum ratings specified in the table.
6. Testing: Test the device under typical operating conditions to verify performance.
7. Storage: Store in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)