Details

---

BUY SEMIX703GB126V1 https://www.utsource.net/itm/p/12375409.html

Parameter	Description	Value	Unit
Part Number	Component Identifier	SEMIX703GB126V1	-
Type	Device Type	IGBT Module	-
Technology	Manufacturing Process	Trench Gate Field Stop (FGFS)	-
Package	Housing Type	SEMITOP E	-
Rated Voltage (Vce)	Maximum Collector-Emitter Voltage	1200	V
Rated Current (Ic)	Continuous Collector Current	700	A
Peak Collector Current (Icm)	Non-Repetitive Peak Collector Current	1400	A
Collector-Emitter Saturation Voltage (Vce(sat))	Collector-Emitter Saturation Voltage at Ic = 700A, Vge = 15V	1.8	V
Turn-On Time (ton)	Turn-On Time	0.9	μs
Turn-Off Time (toff)	Turn-Off Time	1.2	μs
Thermal Resistance (Rth(j-c))	Junction to Case Thermal Resistance	0.12	K/W
Operating Temperature Range (Tj)	Junction Temperature Range	-40 to 150	°C
Storage Temperature Range (Tstg)	Storage Temperature Range	-40 to 150	°C
Humidity Sensitivity Level (HSL)	Humidity Sensitivity Level	1	-

Instructions for Use:

1. Handling and Storage:

   • Store the module in a dry, cool place to avoid moisture absorption.
   • Handle the module with care to prevent mechanical damage or electrostatic discharge (ESD).

2. Mounting:

   • Ensure the mounting surface is flat and clean to achieve good thermal contact.
   • Apply a thin, even layer of thermal grease between the module and the heat sink.
   • Torque the mounting screws to the recommended value to ensure proper contact and prevent overheating.

3. Electrical Connections:

   • Use appropriate wire gauges and connectors to handle the rated current.
   • Ensure all connections are secure to prevent arcing or overheating.
   • Apply a suitable gate drive voltage to ensure reliable operation.

4. Thermal Management:

   • Monitor the junction temperature to ensure it remains within the specified range.
   • Use a suitable heat sink with adequate cooling capacity to dissipate heat effectively.

5. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Regularly inspect the module for signs of wear or damage.

6. Safety Precautions:

   • Always follow safety guidelines when handling high-voltage and high-current components.
   • Use appropriate personal protective equipment (PPE) when necessary.

(For reference only)