Details

---

BUY TLE2072AIDG4 https://www.utsource.net/itm/p/12376112.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	2.7	-	6.0	V	Operating supply voltage range
Input Offset Voltage	VIO	-	1.5	5.0	mV	Maximum input offset voltage
Input Bias Current	IB	-	30	100	nA	Typical input bias current
Input Offset Current	IOS	-	10	50	nA	Typical input offset current
Slew Rate	SR	-	0.4	0.8	V/渭s	Slew rate
Bandwidth (Unity Gain)	fT	-	1.9	3.6	MHz	Unity gain bandwidth
Large Signal Voltage Gain	AV	-	200	-	V/mV	Large signal voltage gain
Output Short-Circuit Duration	tSC	-	-	Indefinite	s	Output short-circuit duration

Instructions for Using TLE2072AIDG4:

1. Power Supply: Ensure the supply voltage is within the specified range of 2.7V to 6.0V.
2. Input Signals: Keep input signals within the common-mode input voltage range to avoid distortion.
3. Biasing: Consider the input bias and offset currents when designing the circuit, especially in high-impedance applications.
4. Slew Rate and Bandwidth: For optimal performance, ensure that the frequency and slew rate requirements of your application are met by this device.
5. Short Circuit Protection: The output can withstand short circuits indefinitely; however, prolonged short circuits may lead to overheating.
6. Gain Configuration: Set the gain appropriately based on the application needs, considering the large signal voltage gain.
7. Stability: Use appropriate compensation if necessary to ensure stability at unity gain or higher gains.

For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.

(For reference only)