Details

---

BUY SST29EE010-70-4C-NH https://www.utsource.net/itm/p/12376117.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	2.7	-	3.6	V	Operating voltage range
Standby Current	Icc	-	1	-	μA	Quiescent current
Active Current	Icc	-	15	-	mA	Current during active operation
Programming Current	Iprog	-	2	-	mA	Maximum current required for programming
Erase Time (Sector)	Ters	-	15	-	ms	Time to erase one sector (64K bytes)
Write Time (Byte)	Twr	-	5	-	μs	Time to write one byte
Data Retention		-	10	-	Years	Guaranteed data retention
Operating Temperature	Topr	-40	-	85	°C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range
Package Type		-	-	-	SOIC-8	Package type
Memory Size		-	-	-	1 Mbit	Total memory size
Organization		-	-	-	128K x 8	Memory organization
Write Protect Pin	WP	-	-	-	Pin	Pin used to enable or disable write protection

Instructions

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.7V to 3.6V.

2. Current Considerations:

   • The standby current (Icc) is typically 1μA.
   • The active current (Icc) is typically 15mA.
   • The programming current (Iprog) should not exceed 2mA.

3. Programming and Erasing:

   • Sector erase time (Ters) is typically 15ms for a 64K byte sector.
   • Byte write time (Twr) is typically 5μs.

4. Data Retention:

   • Data is guaranteed to be retained for up to 10 years under normal operating conditions.

5. Temperature Ranges:

   • Operating temperature (Topr) ranges from -40°C to 85°C.
   • Storage temperature (Tstg) ranges from -65°C to 150°C.

6. Package and Memory:

   • The device comes in an SOIC-8 package.
   • It has a total memory size of 1 Mbit, organized as 128K x 8 bits.

7. Write Protection:

   • Use the Write Protect (WP) pin to enable or disable write protection. Setting the WP pin high will prevent any write or erase operations.

8. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures.

9. Initialization:

   • Before using the device, ensure it is properly initialized according to the datasheet specifications.

10. Communication Protocol:

    • Refer to the datasheet for detailed information on the communication protocol and command sequences.

(For reference only)