Details

---

BUY BUF460AV https://www.utsource.net/itm/p/12376764.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.5	5.0	5.5	V	Operating supply voltage
Input Voltage Range	VI	0	-	VCC	V	Input voltage range
Output Voltage Range	VO	0	-	VCC - 0.3	V	Output voltage range
Input Leakage Current	IIL	-1	0	1	μA	Maximum input leakage current
Output Short-Circuit Current	IOS	-	25	-	mA	Continuous output short-circuit current
Propagation Delay Time	tpd	-	12	18	ns	Propagation delay time
Power Dissipation	PD	-	-	150	mW	Maximum power dissipation per package
Operating Temperature	TA	-40	-	85	°C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range

Instructions for Using BUF460AV

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.5V to 5.5V.
   • Connect the V_CC pin to the positive supply and the GND pin to the ground.

2. Input Signals:

   • The input voltage (V_I) should be within the range of 0V to V_CC.
   • Avoid applying voltages outside this range to prevent damage to the device.

3. Output Signals:

   • The output voltage (V_O) will be between 0V and V_CC - 0.3V.
   • Ensure that the load connected to the output does not exceed the maximum output short-circuit current of 25mA.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 12ns with a maximum of 18ns.
   • Account for this delay when designing timing-sensitive circuits.

5. Thermal Management:

   • The maximum power dissipation (P_D) is 150mW.
   • Ensure adequate heat sinking or cooling if operating near the maximum power dissipation.

6. Temperature Considerations:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STG) is from -65°C to 150°C.
   • Store the device in a dry environment to avoid moisture damage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use proper ESD protection measures during handling and installation.

8. Testing:

   • Before integrating the BUF460AV into your design, test it under the specified conditions to ensure it meets the required performance parameters.

(For reference only)