Details

---

BUY LICAL-ENC-MS001 https://www.utsource.net/itm/p/12376780.html

Parameter	Description
Product Code	LICAL-ENC-MS001
Type	Encoder Module
Interface	SPI, I2C
Resolution	12-bit (4096 steps per revolution)
Supply Voltage	3.3V to 5V DC
Operating Current	< 20mA
Dimensions	20mm x 20mm x 10mm
Weight	5g
Shaft Diameter	6mm
Shaft Length	8mm
Pulses per Revolution	4096 (for one full rotation of the shaft)

Instructions:

1. Power Supply: Connect the module to a power supply within the range of 3.3V to 5V DC.
2. Interface Connection: Use either SPI or I2C interface for communication depending on your application requirements. Ensure proper pin connections as per the datasheet.
3. Installation: Mount the encoder module ensuring the shaft aligns with the rotating part you intend to measure.
4. Firmware/Software Setup: Initialize the encoder in your microcontroller code by setting up the appropriate pins for data transmission and reception.
5. Reading Data: Configure the microcontroller to read data from the encoder at regular intervals to monitor rotational position accurately.
6. Maintenance: Keep the encoder module clean and free from debris that might affect its operation. Avoid exposing it to extreme temperatures or moisture.

(For reference only)