Details

---

BUY YGW60N65F1 China original brand new TO-247 LX https://www.utsource.net/itm/p/12377821.html

Parameter	Value
Part Number	YGW60N65F1
Brand	China Original
Package Type	TO-247
Device Type	MOSFET
Channel Type	N-Channel
Drain-Source Voltage	650V
Continuous Drain Current	60A (at 25掳C), 30A (at 100掳C)
Rds(on)	25 m惟 (max) at Vgs = 10V
Gate-Source Voltage	卤20V
Power Dissipation	280W (at 25掳C)
Junction Temperature	-55掳C to +150掳C
Storage Temperature	-55掳C to +150掳C
Total Gate Charge	110 nC (max)
Input Capacitance	2900 pF (typ) at Vds = 400V, Vgs = 0V
Output Capacitance	100 pF (typ) at Vds = 400V, Vgs = 0V
Reverse Transfer Capacitance	50 pF (typ) at Vds = 400V, Vgs = 0V
Thermal Resistance (RthJC)	0.5掳C/W
Thermal Resistance (RthCS)	2.5掳C/W

Instructions for Use

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the leads and body.
   • Use proper ESD (Electrostatic Discharge) precautions to prevent damage.

2. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Apply a thin layer of thermal compound to the back of the TO-247 package for better heat dissipation.
   • Tighten the mounting screws to the recommended torque (typically 1.5 to 2.5 Nm).

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals as per the circuit diagram.
   • Ensure all connections are secure and free from shorts or loose contacts.
   • Use appropriate wire gauges to handle the current ratings.

4. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and temperature.
   • Monitor the junction temperature to ensure it stays within safe limits.
   • Use a heatsink if necessary to manage heat dissipation.

5. Testing:

   • Before applying power, verify all connections and ensure the circuit is correctly configured.
   • Test the device under controlled conditions to ensure proper operation.
   • Use a multimeter to check continuity and resistance values.

6. Safety Precautions:

   • Always disconnect power before making any changes to the circuit.
   • Use insulated tools to avoid short circuits.
   • Follow all relevant safety guidelines and regulations.

For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.

(For reference only)