Details

---

BUY 6MBP20RH060-50 https://www.utsource.net/itm/p/12378197.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Forward Voltage (at IF = 20 A)	VF	-	1.7	2.0	V	@ Tj = 25°C
Reverse Recovery Time (at IRM = 20 A, dI/dt = 200 A/μs)	trr	-	130	180	ns	@ Tj = 25°C
Peak Reverse Voltage	VRM	-	-	600	V	Continuous
RMS Voltage (at f = 50 Hz)	VRRMS	-	-	424	V	-
Average Rectified Output Current (at Tj = 100°C)	IF(AV)	-	20	-	A	-
Surge Current (Non-repetitive)	IFSM	-	200	-	A	@ Tj = 25°C, t = 10 ms
Junction to Case Thermal Resistance	Rth(j-c)	-	0.5	-	K/W	-
Storage Temperature Range	Tstg	-40	-	150	°C	-
Operating Junction Temperature Range	Tj(op)	-40	-	150	°C	-

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Use a thermal compound to enhance thermal conductivity between the device and the heatsink.

2. Wiring:

   • Keep leads as short as possible to minimize inductive effects.
   • Ensure good mechanical support for the leads to prevent stress on the device.

3. Surge Handling:

   • The device can handle surge currents up to 200 A for 10 ms. Ensure that the application does not exceed this limit to avoid damage.

4. Reverse Voltage:

   • The peak reverse voltage should not exceed 600 V to prevent breakdown.

5. Temperature Management:

   • Monitor the junction temperature to ensure it stays within the operating range (-40°C to 150°C).

6. Storage:

   • Store the device in a dry, cool place within the storage temperature range (-40°C to 150°C).

7. Handling:

   • Handle with care to avoid mechanical damage. Use appropriate ESD protection to prevent electrostatic discharge damage.

8. Testing:

   • When testing, ensure that all parameters are within the specified limits to avoid premature failure.

9. Derating:

   • For prolonged operation at high temperatures, consider derating the average rectified output current to ensure reliability.

10. Compliance:

    • Ensure that the device complies with all relevant safety and regulatory standards for your specific application.

(For reference only)