Details

---

BUY EPF6016AQC208-3N https://www.utsource.net/itm/p/12380796.html

Parameter	Description	Value
Device Type	Family	Cyclone II
Package	-	QFP-208
Speed Grade	-	-3 (ns)
Logic Cells	-	6,016
Embedded Memory	M4K Blocks	288 Kbits
Dedicated Multipliers	9x9	57
I/O Pins	-	173
Configuration	-	Active Serial (AS), Passive Serial (PS), JTAG
Operating Voltage	Vcc	1.2V ± 5%
I/O Voltage	VccIO	1.2V, 1.5V, 1.8V, 2.5V, 3.3V
Operating Temperature Range	-	-40°C to +85°C
Power Consumption	Typical (W)	0.15 W (standby), 1.5 W (active)
Package Body Size	-	30 mm x 30 mm
Pin Pitch	-	0.5 mm

Instructions for Use:

1. Power Supply:

   • Ensure that the Vcc is set to 1.2V ± 5%.
   • For I/O pins, set VccIO to the appropriate voltage (1.2V, 1.5V, 1.8V, 2.5V, or 3.3V) based on your application requirements.

2. Configuration:

   • The device supports Active Serial (AS), Passive Serial (PS), and JTAG configuration methods.
   • Use the appropriate configuration file and method as per your design.

3. Temperature Considerations:

   • The operating temperature range is from -40°C to +85°C. Ensure that the device is used within this range to avoid damage.

4. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Use proper ESD protection measures during handling and installation.

5. Pin Connections:

   • Refer to the pinout diagram for correct pin connections.
   • Ensure that all power and ground pins are properly connected to their respective supplies and grounds.

6. Programming:

   • Use the Altera Quartus II software for programming and configuration.
   • Verify the programming settings and ensure that the correct device is selected in the software.

7. Testing:

   • After programming, test the device to ensure it functions correctly.
   • Use boundary-scan testing (JTAG) for verifying the connections and functionality.

8. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Follow the recommended storage conditions provided by the manufacturer.

(For reference only)